GENPRO10X2 12V 2-Bank On-Board Battery Charger | 10 Amp x 2
Sale
GENPRO10X2 12V 2-Bank On-Board Battery Charger | 10 Amp x 2

GENPRO10X2 12V 2-Bank On-Board Battery Charger | 10 Amp x 2

What's Included?: GENPRO10X2 On-Board Battery Charger & (2) Self-Tapping Screws

Voltage: 12V

Current: 10 Amp DC x 2

Battery Banks: 2

Battery Capacity: Lead-Acid & Lithium

Battery Type: Wet, Gel, MF, CA, EFB, AGM, Lithium

Capacity Range: Up to 230 Amp Hours

Power: 150W (Max) x 2

DC Cord + Eyelet Length in (cm): 72" (182)

Dimensions In. (mm): 8.1 x 6.5 x 2.9 (207 x 165 x 73)

Weight Lb. (kg): 8.74 (3.96)


    $339.99 $359.99

    Meet the all-new GENPRO10X2. Similar to our GEN2, only better. It's 19% smaller and delivers 33% more power. It's one of the best performing onboard marine battery chargers we have ever made. A two-bank onboard battery charger rated at 20-amps (10-amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries.


      • A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
      • Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries.
      • An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
      • Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
      • Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
      • It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
      • A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
      • A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.

    Meet the all-new GENPRO10X2. Similar to our GEN2, only better. It's 19% smaller and delivers 33% more power. It's one of the best performing onboard marine battery chargers we have ever made. A two-bank onboard battery charger rated at 20-amps (10-amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries.


      • A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
      • Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries.
      • An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
      • Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
      • Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
      • It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
      • A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
      • A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.
    CHARGING   OPERATING REQUIREMENTS
    Current 10 Amp DC x 2 Line Voltage 120V to 240V AC
    Voltages 12V Frequency 50Hz to 60Hz
    Chemistry Lead-Acid & Lithium Operating Temperature -4° to 104° F (-20° to 40° C)
    Types Wet, Gel, MF, CA, EFB, AGM, Lithium Storage Temperature -22° to 140° F (-30° to 60° C)
    Capacity Range Up to 230 Amp Hours Relative Humidity 0 to 95% Non- Condensing
    Maintenance All Battery Sizes
    POWER  PRODUCT SIZE
    Consumption 150 Watts (Max) x 2 Height in (mm) 6.5" (165)
    IP Rating IP68 Width in (mm) 8.1" (207)


    Depth in (mm) 2.9" (73)
    Weight Lbs. (kg) 8.74 (3.96)
    WHAT'S IN THE BOX CORD MANAGEMENT  
    GENIUS10X2 On-Board Battery Charger DC Cable + Eyelet Length 72 Inches (182cm)
    (2) Self-Tapping Screws DC Cable Size 14 AWG
    User Guide & Warranty Information DC Fuse Size 15 AMP MINI ® Blade Fuse

    AC Cable Length in (cm) 72" (182)

    AC Cable Size 18 AWG

    Features Oil, gas, grease, water, chemical, UV, abrasion resistant

    3 Year Manufacturer Limited Warranty.